| System Size and Weight | 1,626 x 864 x 711 mm |
|---|---|
| Available material | PLA2, ABS-M30, ABS-CF10, ASA, TPU 92A, QSR Support material |
| Build tray dimension | 254 x 254 x 254 mm (10 x 10 x 10 in.) |
| Material Bays | 2 total 1 model / 1 support |
| Software | GrabCAD Print |
| Power Requirements | 100–132V/15A or 200 – 240V/7A. 50/60 Hz |
| Manufacturer Website | https://www.stratasys.com/en/ |
| Specifications | 10kg / 22lbs |
|---|---|
| Reach | 1300mm / 51.2in |
| Degrees of Freedom | Six rotary joints |
| Programming | PolyScope graphic interface (equipped with 12” touchscreen) |
| Pose Repeatability | +- 0.05mm, with payload per ISO 9283 |
| Power Consumption | 350W when standard program is used |
| Manufacturer Website | https://www.universal-robots.com/ |
| Length, Width, Height (mm) | 800 x 580 x 300 |
|---|---|
| Weight (Kg) | 83 |
| Loading Surface (mm) | 800 x 580 |
| Payload (Kg) | 250 |
| Maximum Speed (m/s) | 2.0 |
| No-load Operating Time | 17.4 hours |
| Manufacturer Website | https://www.mobile-industrial-robots.com/ |
| Reference Distance | 20 mm |
|---|---|
| Measurement Range | Z-axis (height) ±2.2 mm (F.S.=4.4 mm) | X-axis (width):Near 7 mm, Reference distance 7.5 mm, Far 8 mm |
| Light Source | Wavelength 405 nm (visible light) output 10 mW |
| Profile Data Quantity | 3200 points |
| Weight | Approximately 1000 g |
| High Dynamic Range (HDR) | Single shot HDR*9 |
| Manufacturer Website | https://www.keyence.co.kr/ |